Hands on the guitar.

07.1The control map

The Control tab holds three cards. The first is CONTROL MAP — your own mappings, the ones that override everything else. Its blurb says what it takes: MIDI controls and input triggers, mapped to anything. Sources: any CC or note (use LEARN), a knock on the body, a held note or a chord.

The header has a presets chip and a + (Add mapping). With nothing mapped yet the card reads No mappings yet — add one with +.

Every mapping is one row, read left to right: a source chip, a LEARN button, an arrow, an action chip, and an ✕ to delete the row. Saved maps live under Control Presets on the presets chip, so a pedalboard layout for one band need not follow you to the next.

07.2MIDI learn

You never type a CC number. On a mapping row:

1. Tap LEARN. The chip lights up and the row waits.
2. Press the footswitch or sweep the pedal you want to use.
3. The source chip fills in as CC 42 or Note 60, and the card's Last: line confirms it — Learned CC 42.

Tap LEARN again to disarm. The source chip's own menu has a MIDI section with CC… (use LEARN) and Note… (use LEARN), and a Taught sounds section listing the sounds you have trained plus Teach a new sound…

Learn in place

You do not have to start from the Control tab. Long-press almost any control in the app — a knob, a chip row, a looper pad, a sampler pad, the Perform transport buttons — and the menu offers MIDI Learn: <name> for that exact control. It outlines itself and shows MOVE A MIDI CONTROL…; move the pedal and the mapping is made. Cancel learn backs out if you grabbed the wrong knob.

07.3What you can map to

The action chip's menu, in full:

Once you have more than one rig, three more entries appear: Next rig, Block on/off · Active rig and Block param · Active rig. Those follow whichever rig currently has MIDI focus, so one footswitch can bypass "the drive in whatever rig I am playing" instead of a fixed block in a fixed rig.

Two constraints are worth remembering before you wire a pedal:

• A continuous block parameter needs a CC. Notes and taught sounds are events — they cannot sweep a value — so the parameter submenu is hidden for those sources. An expression pedal sending a CC is what you want.
• Soft pickup after a rig switch. A continuous CC mapped to Block param · Active rig does not jump the knob when you change rigs. It waits until your pedal sweeps past the new rig's current value, then takes over — so switching rigs mid-song never snaps a parameter to wherever your foot happens to be.

07.4The built-in MIDI map

Before you map anything, a fixed layout is already live — plug a controller in and it works. All channels are accepted, because NAMper listens omni, and every source that appears is connected automatically. The app also publishes a virtual destination named NAMper, so another app on the same device can send to it.

Your own mappings always win. If you learn a footswitch to CC 85, your row runs and the built-in track-1 tap on that CC steps aside — so you never have to work around the defaults, only over them.

Press detection is deliberately forgiving of cheap pedals. A message counts as a press when its value is 64 or more, and also when it is low but did not follow a high one — so a footswitch that sends every press as value 0 still fires discrete actions.

At the bottom of the card, one line tells you what NAMper can see: MIDI: waiting for sources or the names of the connected sources, with a Last: line under it showing the most recent event. If a pedal does nothing, look there first — it tells you whether the messages are arriving at all.

07.5Bluetooth MIDI

Wireless pedals pair from inside the app. At the bottom of the built-in map card, tap Pair Bluetooth MIDI. A sheet titled Bluetooth MIDI opens with the system pairing panel in it and a Done button. Put your pedal into pairing mode, tap it in the list, and it joins the MIDI sources line.

NAMper asks for Bluetooth permission the first time you open this sheet, and for nothing else.

07.6Taught sound triggers

The TAUGHT SOUNDS card needs no hardware at all. You teach NAMper a noise you can make with the instrument in your hands, and from then on it fires any action, exactly like a MIDI event. The empty state puts it plainly: Teach the app a sound — a knock on the body, a string slap, a click behind the bridge — then map it to any action, like a MIDI event.

Teaching one

Tap TEACH and the sheet TEACH A SOUND opens with its instruction: Make the sound 3–5 times, the same way each time: knock the body, slap the strings, click behind the bridge — anything with a clear attack. Eight dots fill in as takes arrive, and the status reads Listening… and then the count. Give it a name in the Sound name field and tap Save the sound. Save needs at least two takes, and up to eight are averaged — more consistent takes make a more reliable trigger.

Each row shows the name, a usage count like 3×, a RE-TEACH button and a delete ✕. Tap the name to rename it. Re-teaching keeps the name and every mapping that points at it, so if a sound starts misfiring after you change guitars, re-teach it rather than starting over.

A taught sound can fire any action in the menu except a continuous block parameter — it is an event, not a sweep. And as on the control map, only the first four taught-sound mappings are active at once.

07.7The tuner

The tuner is not a tab. It opens from the tuning-fork icon in the Rig header, and it works whenever the audio engine is running — including when the feedback guard has muted the output, so you can still tune with the phone on its own speaker.

Two mode chips sit at the top, POLY and SINGLE. POLY is the default and the one to use on stage: strum once and every string reads at the same time, one vertical meter per string with the note underneath. Its caption says it — strum — every string reads at once. A string's dot goes green inside ±5 cents.

SINGLE is the classic one-note-at-a-time tuner: a big note letter, a needle across ±50 cents and a cents readout, going green inside ±3 cents. With no signal it shows play a note… Use it when you want to be precise about one string.

Instrument and tuning

NAMper works out what you are holding by itself and shows it as a pill: GUITAR, BASS or UKULELE. There is no picker — plug a bass in and the tuner follows.

The tuning chips apply to POLY mode, and each instrument remembers its own choice:

Reference pitch is fixed at A4 = 440 Hz. There is no calibration control, so if you play with an orchestra at 442 the tuner will not follow you there.